How to program the Flipper using the code list
This article refers to our Flipper Big Button Remote Control
Please find instructions below on how to program your Flipper using the coded method, further information is included in the instructions.
The instructions below should be followed for all codes listed in the code list for your TV/STB brand. Follow the instructions for each code one by one until your device works or you run out of codes for your brand
- 1
- Hold the TV OR STB button (depending on the device you're programming) on the Flipper until the light turns solid
- 2
- Enter the first 4 digit code (codes can be found in the code booklet) - The Flipper light will turn off
- 3
-
Test the buttons on your Flipper to see if programming was successful (see below)
A) Programming your TV? Test the on/off button + volume controls
B) Programming your STB? Test the channel up/down buttons - 4
- If unsuccessful, start at step 1 and move onto the next 4 digit code
- 5
-
Repeat for all codes listed until you find a code that operates your TV