Unlocking the Flipper

This article refers to our  Flipper Big Button Remote Control

Please see below for instructions on how to unlock the Flipper. Unlocking the Flipper is useful for troubleshooting as it ensures that the device is not "locked" into any mode, which can sometimes cause the device to act unusually and/or prevent further troubleshooting. Unlocking the Flipper is safe and  will not change/delete any of your programming or affect how the Flipper functions.

Unlock Instructions

  1. Press & hold ADD until the light turns solid, then enter 956 - the light will blink out
  2. Press & hold TV until the light turns solid, then enter 956 - the light will blink out
  3. Press & hold STB until the light turns solid, then enter 956 - the light will blink out

Tip: It's important to make sure that the light turns off every time a code is entered, such as 956 above. If the light remains solid the Flipper hasn't been unlocked and you will need to try again.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.